Can install double work platform, both blade work table and honeycomb work table, can use to do both cutting and engraving.
Use high strength gold-plated lenses and aspherical focusing lenses from U.S II-VI with features of high focus, high transmittance. The reflectivity is as high as 99.6%, much higher than 92%~95% of common mirrors. It can greatly ensure the effectiveness of the laser, prolong the service life of the laser tube.
Adopt Japanese high performance, low cost stepping motor, it’s new design, new process and with imported core materials. Compared with the common stepping motor, it has the advantages of greater torque, lower heating, better running stability and so on.
Environmental protection without pollution.
Three-stage filtration.
The first is bag filtration of large particles.
The second IS HEPA filtration of particles larger than that of 0.03um.
The third is activated carbon adsorbs of smoke and dust odour.
One-click start fan, the operation of the fan is automatically controlled to exhaust smoke produced by cutting.
Wood, organic glass, plastic, garments, paper, leather, rubber, and other nonmetal materials.
| Тип лазера | Sealed CO2 laser tube |
| Мощность лазера | 40w 60w(optional) |
| Рабочее поле | 600mm x 400mm |
| Габаритный размер станка | 950mm x 740mm x 450mm |
| Скорость резки | 0-48,000mm/min |
| Ripristino dell'accuratezza del posizionamento | ±0.05mm |
| Рабочее напряжение | AC 110-220V ±10%, 50-60Hz |
| Полная мощность | <1000w |
| Рабочая температура | 0-45℃ |
| Влажность работы | 5-95% |
Ведущий мир
СО2 лазерный резак G-Weike LC 1390
CO2 лазерный гравёр G-Weike LG 6040N
CO2 лазерный гравёр G-Weike Storm 600
Настольный лазерный гравировальный станок 3D
CO2 лазерный гравёр G-Weike LG 900N
