Can install double work platform, both blade work table and honeycomb work table, can use to do both cutting and engraving.
Without manually adjust focal length; Improve the efficiency and precision of laser cutting machine.
Equipped with Taiwan Hiwin rail guide, with features of high positioning accuracy, strong load bearing and good dynamic performance.
Environmental protection without pollution.
Three-stage filtration.
The first is bag filtration of large particles.
The second IS HEPA filtration of particles larger than that of 0.03um.
The third is activated carbon adsorbs of smoke and dust odour.
Using Yongli laser tube, its photoelectric conversion efficiency is high, the laser output power density is high, the beam is concentrated, and the spot is uniform. The engraving/cutting speed is fast and the engraving line is deep and narrow with high resolution and clear characters. The work life of laser tube is long and the fault rate is low.
This machine is designed specially for thick material with its automatic up and down platform, customers can engrave on different thickness of materials.
One-click start fan, the operation of the fan is automatically controlled to exhaust smoke produced by cutting.
Adopt Japanese high performance, low cost stepping motor, it’s new design, new process and with imported core materials. Compared with the common stepping motor, it has the advantages of greater torque, lower heating, better running stability and so on.
Use high strength gold-plated lenses and aspherical focusing
lenses from U.S II-VI with features of high focus, high
transmittance.
Wood, organic glass, plastic, garments, paper, leather, rubber, and other nonmetal materials.
| Тип лазера | Sealed CO2 laser tube |
| Мощность лазера | 40W 60W 80W (optional) |
| Рабочее поле | 600mm x 400mm |
| Габаритный размер станка | 1360*850*950mm |
| Скорость резки | 0-36,000mm/min |
| Ripristino dell'accuratezza del posizionamento | ±0.05mm |
| Рабочее напряжение | AC 110-220V±10%,50-60Hz |
| Полная мощность | <1000W |
| Рабочая температура | 0-45℃ |
| Влажность работы | 5-95% |
Ведущий мир
СО2 лазерный резак G-Weike LC 1390
CO2 лазерный гравёр G-Weike LG 6040N
CO2 лазерный гравёр G-Weike Storm 600
Настольный лазерный гравировальный станок 3D
CO2 лазерный гравёр G-Weike LG 900N
